How To Make Bolts For Frankenstein Costume
All Hallows Eve
Every October I make Halloween costumes for my kids. Through past costume builds I have learned 2 main things: eyesight is very of import and keep the feet costless to easily conquer sidewalks, uneven yards, and stairs. To ensure the night of trick-or-treating is a treat, keep the costumes light and comfortable!
The youngest (eight years old at the time) wanted to be Frankenstein's Monster. For his costume I wanted the head and hands to be over-sized like a caricature, equally nosotros were going more for funny and fun instead of realistic and frightening.
Making the Big Easily
I started with cheap cotton work gloves, PVC pipe, PVC 45 caste curve connectors, and fleck foam (sponges would work too).
Cut the pipage into small segments so they fill the ends of the large work glove fingers.
Adhere the 45 degree connectors (I just pushed them together and didn't mess with whatever PVC cement).
Glue foam to the ends to round out the fingers and fill the tips of the glove.
Fit all the PVC fingers into the large work glove.
Tests with and without the smaller glove were tried and nosotros concluded the minor ones weren't needed.
I did glue thin pieces of foam to the palm ends of the 45 degree connectors to make them a fleck more comfy.
Rinse and Repeat for the other hand.
Making the Large Foam Head
The cream I used was one/4 inch poly-cream found at virtually cloth stores.
Judge the height of the head and test-wrap the foam effectually your child'southward head.
Marking height and length and cut out the big rectangle of foam (off and away from your kid'southward head!).
I employ hot glue to attach all the foam pieces. At that place are many contact cements that tin also be used.
Glue the edges of the seam to create the tall tube.
Test fit and marking where eye and olfactory organ holes demand to exist.
Cut out holes for the eyes and nose.
Cut new shapes to form the chin/lower lip, a nose, and the forehead. You will also demand to cut a circle that will be the elevation part of the monster'due south flat head. Trace the end of the tube to get an guess size.
Gum the foam circle into the top of the tube.
I formed the rounded brow and olfactory organ by bending and pinching the foam into shapes and gluing on the back side.
Examination fit again. It is important for the wearer to be every bit comfortable equally possible. Brand any adjustments as needed.
I trimmed effectually the back and bottom part of the tube for better fit around the shoulders.
Final Touches
Use a white spray primer on the hands if the gloves are a dark colour.
Spray paint the whole caput and both gloves to match. I used olive dark-green Krylon.
After the paint is dry I used a Sharpie marker to draw on the eyebrows and hair.
The cervix bolts are simply short pieces of pipe insulation spray painted silver. You could also merely roll up pieces of left over foam.
Putting It All Together
I bought a cheap suit coat at a austerity store. Size is non besides important here as you tin can just cut the jacket and sleeves to length in short ragged snips.
I used a darker chocolate-brown spray paint to dirty up the coat.
Have your monster performer wear drab clothes for shirt and pants (mine chose a skull printed shirt and jeans. Remember the condolement tip!)
Put on the coat, then the hands, and finally the head.
Walk with strong limbs and IT'Southward ALIIIIVE!
Source: https://makezine.com/article/craft/makeup-costumes/how-to-foam-head-frankenstein-costume/
0 Response to "How To Make Bolts For Frankenstein Costume"
Post a Comment